A manual hours of service recap calculator
Use this HOS recap calculator to reconcile your entered daily on-duty totals with the standard US interstate property-carrier cycle. It is a worksheet, not a duty recorder or a compliance system. Confirm your carrier assignment and copy appropriate reconciled records. Passenger, intrastate, Alaska special regimes, exemptions and other operations need separate review.
The formula
Integer-minute, user-entered record totals. Cycle capacity is not remaining legal driving time.
For 70/8, seven earlier days of 11, 9, 0, 0, 10, 10 and 10 hours total 50. Four hours actually worked today produce 54 used and a signed balance of +16. If three additional hours are planned today and the oldest 11 hours leave next, the next opening is 54 + 3 − 11 = 46 used, with a conditional +24 balance. This is not remaining legal driving time.
70 hour 8 day recap calculator: include today
For the carrier-assigned 70/8 cycle, add the seven previous completed duty-record days and today’s actual on-duty time so far. Subtract from 70 hours. Do not add eight previous days plus today. The cycle is rolling, not a Monday-to-Sunday week. At the next carrier-defined record boundary the oldest retained day leaves; its hours are not automatically the same as the total balance next day.
The 60 hour 7 day recap calculator uses six previous days
The 60/7 worksheet retains six completed record days plus today. A carrier that does not operate CMVs every day ordinarily uses this cycle; a carrier operating every day may assign the eligible 70/8 cycle or retain 60/7. The driver must confirm the assignment. Switching the numerical worksheet is not permission to select whichever yields more hours.
Which work belongs in the daily total?
Count driving plus on-duty-not-driving time once. Inspections, fueling, loading, paperwork and other covered work can matter, including relevant work for another employer. Do not enter only steering hours, then assume the resulting balance matches the carrier’s record. This tool does not classify personal conveyance, yard movements or exemptions for you.
Carrier record days, home-terminal time and DST
Your duty-record day starts at the carrier-designated time using the home-terminal record standard. That may differ from midnight, your device zone or the calendar date at the truck’s current location. This V1 sums reported daily totals; it does not rebuild them from timestamps, convert them between zones or infer a 23-hour or 25-hour legal allowance at a clock change. Reconcile incompatible source records before calculation.
Today actual is not additional planned duty
Actual duty already performed belongs in the current recap. Additional work today is a separate planning input. With 54 hours used, three additional hours planned and 11 aging out, next opening usage is 46, not 43 or 50. Leaving additional duty blank does not mean zero. An explicit no-further-duty assumption is a scenario, not a record of rest.
How to calculate HOS recap projections
Each future opening sums only its previous retained days. Add that day’s explicit plan for closing usage, then drop the next oldest record at the following boundary. The optional seven-day planner labels plans, assumptions and unknowns. A missing plan prevents any exact balance that depends on it. If that unknown day later leaves the window, later figures may become computable from the remaining known contributions.
Unknown records are different from confirmed zero
A confirmed zero says the user explicitly reports no on-duty work for that record. A blank day says the amount is unknown. An incomplete known subtotal cannot establish exact cycle capacity. Drafts do not automatically shift dates or fill skipped days with zeros. When today becomes history, confirm its final completed total rather than carrying an unfinished partial entry forward.
A negative signed balance is not proof of a driving violation
At 70 hours entered against a 70-hour cycle, theoretical capacity is zero. At 70 hours and one minute, signed balance is minus one minute and the over amount is one minute. Keep that deficit visible. The daily totals alone do not reveal whether commercial driving occurred after a threshold. A plan exceeding the modeled balance is preserved for review rather than silently reduced.
Recap versus a user-reported 34-hour restart
Rolling age-out gradually stops counting old records. A qualifying property-carrier restart has a different effect, but this worksheet does not verify it. If you report completion in a six-hour record day with four hours before and two after, preserve the original six and include only the explicit two-hour eligible subtotal. Missing or conflicting split data blocks a precise adjusted balance. A 10-hour daily rest does not itself reset the rolling cycle.
Current official examples are distinct scenarios
FMCSA’s April 2022 Interstate Driver’s Guide, printed pages 10–11, uses 0, 10, 8.5, 12.5, 9, 10, 12, 5, 6 and 0 hours: successive eight-day windows total 67, 73 and 63. Its current Hours of Service Examples, Example 29 on pages 56–58, instead records eight on-duty hours on the next Monday and yields 67, 75 and 65. Do not mix those later-day inputs. Example 8 on pages 18–21 totals 11 + 10 + 10 + 12 + 10 + 7 = 60; the depicted restart still requires continuous qualifying rest, not just daily totals.
Original planning example and common mistakes
The sample’s 54-hour current usage excludes the additional three hours planned today. With ten hours explicitly planned on each future day, the fourth projected closing reaches 77 hours, a signed minus-seven balance. The plan remains ten hours; it is not a forecast or permission. Avoid counting today or an age-out twice, confusing 9:30 with decimal 9.30, erasing a whole restart-crossing day or treating unknown records as zero.
Reconcile records and keep other clocks separate
Theoretical on-duty cycle capacity is not remaining legal driving time. The 11-hour driving limit, 14-hour window, required breaks, sleeper rules and applicable exceptions require information this worksheet does not evaluate. Compare inputs against actual reconciled duty records and carrier requirements. Older two-overnight and once-per-168-hour restart conditions are not applied; pilot projects and proposals are not general rules.
Privacy and local worksheet exports
Drafts live only in browser memory and clear on refresh. No driver identity is required, work records are not sent to analytics, and no ELD account or API is connected. Copy and CSV include inputs, unknown states, assumptions, unverified restart details and warnings. Review exported work schedules before sharing them. The file is a preparation worksheet, not a certified log or proof of legal availability.
Using this in a dispatch decision
Use entered record totals to prepare a rolling-cycle worksheet, not to authorize a load. Confirm carrier assignment, home-terminal record days and all other driving clocks separately. Unknown records and unverified restart adjustments remain unresolved; a projected cycle balance is not remaining legal driving time.
Method and reference sources
Method and content checked 2026-10-17. These sources provide background, not endorsement or professional certification. The formula and limitations above define this calculator.
- 49 CFR 395.3 — Property-carrier rulesStandard cycle and daily requirements; not a claim of individual applicability.
- 49 CFR 395.2 — DefinitionsOn-duty time and carrier-defined consecutive record periods.
- 49 CFR 395.8 — Duty recordsHome-terminal time standard and carrier-designated day start.
- 49 CFR 395.1 — ExceptionsSpecial regimes and exceptions are not modeled automatically.
- 49 CFR 395.5 — Passenger rulesOutside this default property-carrier worksheet.
- FMCSA HOS summaryEducational comparison of property and passenger rules.
- FMCSA current Driver’s GuideApril 2022 rolling example, printed pages 10–11.
- FMCSA current HOS ExamplesApril 2022 Examples 8 and 29; daily totals alone do not qualify a restart.
- FMCSA carrier-cycle assignment guidanceApplicable cycle depends on carrier operations and assignment.
Frequently asked questions
What does this HOS recap calculator calculate?
It sums entered duty-record-day totals for 70/8 or 60/7, shows signed cycle arithmetic and oldest-day age-out, and conditionally projects explicit plans. It does not calculate legal driving permission.
Do recap hours always return at midnight?
Only if midnight is the carrier’s designated record-day boundary. Use the home-terminal record standard and carrier-defined starting time. The worksheet does not infer a boundary from your device zone.
Do I include today’s actual duty?
Yes. Use seven completed days plus today for 70/8, or six completed days plus today for 60/7. Additional duty not yet performed belongs only in the planning inputs.
Can a blank day be treated as a day off?
No. Choose Confirmed zero only when you explicitly know the total is zero. Unknown retained records prevent an exact balance, even when a known subtotal can be shown.
Can I use a recap instead of taking a 34-hour restart?
Rolling-cycle arithmetic and a qualifying optional restart are different. Whether driving is available still depends on actual records and every applicable daily and cycle rule. This tool does not make that decision.
Does a negative cycle balance establish a violation?
Not by itself. It shows entered totals above the selected threshold. The worksheet does not know whether driving occurred after the limit and does not issue a legal finding.
Does a reported restart erase its whole record day?
No. Preserve the original total and supply the eligible duty after completion in that crossing day. Missing or contradictory subtotals block an exact adjusted balance. The restart itself remains user-reported and unverified.
Why can my ELD show different remaining driving hours?
Duty classification, incomplete entries, record-day boundaries, corrections, daily driving clocks and breaks may differ. Reconcile actual records. A numerical cycle balance is not an ELD-verified driving clock.